Gas stove leak causes:
Stove connection hose rupture long-term use of aging or because the appliance is not connected to a good cause gas leak, you should replace the hose or hose end fastened with hose clamps. Gas stove unlit, will smell the gas odor, this time window ventilation gas to be blown before ignition. Sealing material is dried, depleted or aging can cause the appliance gas safety burner valve seals Mifengbuyan caused the leak, replace the seal material until the replacement valve, the valve leaks after installation testing.
Gas safety valve is a device for supporting new gas pipeline project. Used to cut, turned, adjusting the gas pipeline, with good control characteristics and closed sealing performance.
2015年8月26日星期三
2015年8月20日星期四
Gas stove ignition causes of failure
Gas stove ignition causes of failure:
Valve does not open the stove can cause ignition failure, Whether the ignition is turned on the stove top burner valve. Since moving stove will stove connection pipe kink, crush, or because the gas contains more condensate hose caused by blocked air barrier, ignition failure, by checking whether the hose compression, bending and correcting or by replacing new Hose troubleshooting. After the free standing gas stoves just replace the connection hose, due to mixing of air in the pipe, it can cause temporary ignition failure, through multiple ignition, air drain pipe can be successful ignition.
Valve does not open the stove can cause ignition failure, Whether the ignition is turned on the stove top burner valve. Since moving stove will stove connection pipe kink, crush, or because the gas contains more condensate hose caused by blocked air barrier, ignition failure, by checking whether the hose compression, bending and correcting or by replacing new Hose troubleshooting. After the free standing gas stoves just replace the connection hose, due to mixing of air in the pipe, it can cause temporary ignition failure, through multiple ignition, air drain pipe can be successful ignition.
2015年8月13日星期四
Double gas burner safety valve
Bicyclic fire with dual burner gas stoves with double gas burner safety valve allows the state at the time of the fire protection, fire burner valve leading to the outer stomatal closure, only the inner fire breather, saving gas, convenient to use. Gas stoves should be part of desktop and universal design straight intake pipe opening two structures to meet the needs of different location to install the hose; the design of the intake pipe joints mouth, to consider dismantling the hose after a larger force and collisions Easy Air leaks; T-tube diameter, the inner diameter of the valve body and tap the pore diameter pipeline at different gas source designed to prevent the amount of gas supply due to insufficient or excessive deterioration of combustion gas supply.
2015年8月6日星期四
Often switch gas valve will cause the gas valve leak
Under normal circumstances would not, but whether the burner valve loose aging ah long time be sure to check the next! Below are notes, are interested can look after you are finished using the water heater be sure to turn off the heater valve. Always check the gas supply pipe (rubber hose) is intact, with or without aging, crack. Attention to regular replacement of rubber hose, frequently at the hose connections with soapy water to check for bubbles appear, to determine whether there is leakage, try to stop the leak. Gas Burner Safety Valve Precautions First: When gas water heater gas water heater must ensure that ambient air circulation, ensure good ventilation of the entire environment, conducive to the exhaust emissions. Second: use of time not too long, especially when the family use, should stagger the time, so that the cooling gas water heaters and exhaust emissions to the outdoors. Third: NOTE gas water heater when the case temperature will rise, careful not to touch when in use.
订阅:
博文 (Atom)