The technical characteristics of liquid pumps liquid chlorine filling applications

Web Design And Seo For www.china-webdesign.com

pneumatic fittings - China Manufacturer

Thank you for inquiry my pneumatic fittings, Tel:0086-574-88869817, Email:jelpc@jelpc.com

http://www.jelpc.com/key-pneumatic-fittings-11/

The the 1.1 liquid chlorine solution works pump liquid pump explosion-proof motor to drive the spindle through the serpentine spring coupling, spindle driven impeller rotating impeller stage

The number of output pressure, gener ally 3 or 4 can meet the needs of liquid chlorine conveying and filling .

1.2 liquid pump liquid filling process of liquid chlorine pump filling process.

Shows that of liquid chlorine from chlorine liquefier by pipeline since the inflow of liquid chlorine storage tanks need filling liquid chlorine, simply open the liquid chlorine storage

Liquid chlorine in the tank below and an intermediate tank connected between the pipe cut-off pneumatic accessory  (CHLOROFORM intermediate tank for a volume of 6m3 of the vertical tank, when installed so that the intermediate tank

In the same horizontal plane as the upper plane and liquid chlorine tank upper plane), so that liquid chlorine into the intermediate tank, and by controlling the liquid level within the large storage tank of the liquid chlorine

Height, rather than the intermediate tank of liquid chlorine for f illing.

Can open the pump when the middle of the tank liquid level reaches the minimum level (600mm), liquid chlorine through the muffler (pressure balance) and the limiting input

Out, the pressure in the 1.01.5MPa, then outside the output pipe, shutoff valve and non-return china solenoid valve  to the filling positions of liquid chlorine cylinders packaging or liquid chlorine tank car

Canned.