In the Hydraulic Valve block both ends of the link connector

Quick release hydraulic valve block is a must use tool to quickly connect or disconnect the pipe connection. Quick connector Hydraulic valve block there are two types: open closed at both ends, both ends open. Turned off both ends of the quick coupling, as shown in the block diagram.hydraulic banjo fittings
 The connector body is 2,10 respective cavity has a unidirectional valve body 4, characterized in that said separation of the two connector main body by a spring, in order to promote one-way valve 3, so that the tapered connector body hole in the valve body is pressed, close the ends of the network, so that the medium does not flow. When the two fitting body port, two-way valve coil impact injectors, the back of the piston and compression spring, so that the path to open. 6 (or 8), the ball falls into the V-shaped groove of the connector body 10, connecting the two terminals of the connection between the body 2 and the work, the use of stainless steel housing 6 extrusion can not be stopped at the jacket by a spring 7 the right end socketless fitting