The hose specializing in the production of hoses, fittings, high pressure hose, often have customers in the use of hose fittings to meet some of the problems. Here, we tell you, hose connectors, should pay attention to three points:
1, the hose fittings carefully open the package, do not let tube interrupt avoid the tangle, then cut to the desired length, wear the harness wires or cables less or more, try to use the hard hose connector, so wear a harness relatively simple , it is a good tube filled with water and tried to water or other liquids do not leak, so they do not break cut is also set.socketless fitting
2 If you are in a large mechanical or automotive wiring harness, it is recommended that the hose to cut the use of open longer appear to save more because a large machine wiring harness may occur, such as the use and cut directly on the comparison work when the line is the best security tape .
If there is water, waterproof, can be accompanied by a high-pressure hose connection, if you want to use the plug in the open like a high pressure hose must use the standard model of the national standards, so when the tube and insert inaccurate or not to go to most of the small tube map , and so on. Tube should we go slightly harder, this card will not fall from the train connections.hydraulic banjo fittings
没有评论:
发表评论