Teflon sintered glass high-temperature filtration performance

Teflon fiberglass sintered high temperature filter main components: glass fiber + PTFE + chemical additives detection technology parameters, as shown in Table 1 below.
Teflon sintered glass filter characteristics
(1) Temperature: Temperature filter is determined by the glass fiber and PTFE temperature performance, long-term use temperature of 260 ° C under short-term and instantaneous temperature up to 300 ° C, thermal heat shrinkage <0.5%.
(2) good acid and alkali resistance: pH value and organic matter have a good alkali and other corrosive gases, including hydrogen fluoride resistance was significantly higher than ordinary glass fiber filters. (Editor: admin)
(3) good wear resistance and anti-fatigue properties, high tensile strength, are better than ordinary glass fiber filters.high pressure hydraulic fittings
(4) the hydrophobic filter surface is smooth, hydrophobic, and attached to the surface of the filter dust, easy to clean, fear, tar, water vapor, dust collector does not require an external insulation, suitable for acidic alkaline composition, humidity fluctuations in the flue gas dust filter.
(5) Thermal stability: 300 ° C under the heat shrinkage ratio of less than 0.5%, the nature of the safety of its use at high temperatures.
(6) air filter: The filter material is a smooth cylinder, dust holding capacity is small, easy to clean and has good wear resistance and fatigue resistance, these features determine that it has a high filtration rate responsible for cleaning reverse jet, rotate, reverse the air conditioning, cleaning, the mechanical vibrations cleaning pulse cleaning.
(7) sintered polytetrafluoroethylene microporous film composite membrane filter medium in the filter insert member. High filtration efficiency, easy to clean, acid and alkali, the flexibility of the plasmid.socketless fitting