Forklift generator installation and maintenance instructions

Web Design And Seo For www.china-webdesign.com

forklift buckets - China Manufacturer

Thank you for inquiry my forklift buckets, Tel：13989310707, E-mail: sales@steelmanattachment.com

http://www.forklift-fork.com/key-forklift-buckets-149/

1, the generator should be installed in the matching engine, the alignment of the two pulley groove center middle of the belt tensioner degree to hand the belt to promote the 10-15MM is appropriate, should be inspected reg ularly in the course of the tight belt inspection and appropriate adjust the appropriate date. - Forklift engine parts
2, the generator output leads for the single wire, negative ground battery ground connection polarity must be consistent, otherwise it would cause the rectifier and voltage regulator burn.
3, the generator field winding since the beginning of anti-leather Ground, outside the Ground regulator grounding type must match.
4, the generator running, do not allow screwdrivers and other metal items will be positive and the chassis or negative short, otherwise it will burn rectifiers. - Forklift engine parts
5, when the engine is started, the charging current from large to small, but there is no discharge phenomenon, indicating that the charging system is normal, do not raise the voltage regulator, otherwise it will damage the battery. After moving fr om the Kai line for some time charging current is very small, or not charging, you should find out the reasons in a timely manner and timely maintenance and troubleshooting.
6, the stator maintenance (with a forklift maintenance), maintenance of the generator rotor rotor should be more flexible, without exception grazing sound job.