The use of hydraulic hoses Hydraulic Adaptors

You should note the following the:hydraulic hose cutting machine
 ① hose away from heat, away from the exhaust pipe of the engine performance. Housing or shielding means can be used, if necessary, by heating, in order to prevent deterioration of the hose. (2) of the hose that must be overcome, or the application may be obtained by a hose clamp or spring protection device, to avoid damage to the mechanical friction of the outer surface of the tube. ③ hose must bend, the bend radius is too small, the outer diameter is greater than 9 times. This should be a hose fittings, more than twice the diameter of the pipe segment. ④ when the mounting tube, should be avoided, there is no relative movement in a tensioned state, in order to keep the hose end portion, the recess and the tension tube to expand under pressure, reduced strength. Do not twist the hose (5) during the installation process. Hose this applies to twist slightly to reduce its strength and loose plug assembly hoses, hose, pull the plug rather than tighten. ⑥ hose critical components, such as configuration, periodic inspection or replacement.hydraulic hose assembly