Extension pipe interface rupture and repair

Suction hose extension pipe today mostly made of ABS plastic thin wall plug, impact resistance, flexural capacity is relatively much worse steel body. Thus, after the collision, the beat easily excluded at the interface crack. Due to the extension pipe is often the 2-3 root connection, so once the interface rupture, extension pipe extension pipe, or other accessories not firmly connected, or not at all connected. Repair this rupture There are many ways one of the ways, first with plastic cracks sticky complement to prevent air leakage, and then solder wire wound rupture the outer end around ten laps or so depending on the length of the actual rupture increase Save), the two ends of the metal wire made of two point to the axis of the hook, hot electric iron in the beginning and end of a metal wire wound at a small hook into the hose, with the adjacent wire weld. So that repair Extension, its strength is even better than the original meters firmly.hydraulic banjo fittings
The fix: self-adhesive polyester film along the rupture estuary cone dry paste 6-7 layers, as shown in Figure 3-i8 (b). Paste hands taut, tight as possible, but before the paste is dry crack sticky complement.
, Soft interface, likes to take a long block and build Shan when the suction inlet suction ball of paper, cotton, and other large garbage, it is easy to the hose interface and take a long tube causing blockage to reduce the suction hose suction or no suction. Dredge to take a long tube, hose interface congestion is very convenient, just need to find a thin wooden stick (bamboo), wear into the blockage, the top of the blockage can be. However, for a class like hose flexible pipe, small aperture and long, to the top of the blockage, it is necessary to wear into the hose with wire to the top of the blockage. However, wear one end of the hose, it should first fold hurried into a round, kill wire to prevent broken hose.metric hydraulic hose fittings